Soleil Manual Paving Cement Brick Concrete Molds DIY Plastic Path Maker Mold Garden Stone Road Paving Mold Garden Building Decoration

Manual Paving Cement Brick Concrete Molds DIY Plastic Path Maker Mold Garden Stone Road Paving Mold Garden Building Decoration~Ice flower type Description: .Garden Walk Pavement Mould, exposing the displayed effect like blocks of stones. widespread in Europe and America, is a custom brick mold. Product Details:.Name: Plastic manual paving mould. Black color. garden.Form for concrete: garden path mould.Thickness: about 3.5cm-4.5cm. Very practical garden tools – Concrete garden molds will help you decorate your garden landscape.2. Use sturdy plastic molds to turn pre-mixed concrete into concrete garden stepping stones for easy garden access.3. Using garden stepping stones as a path, the beauty and health of your plants.4. Spray the cleaning mold with a garden hose for reuse.5. After the first garden stepping stone is watered, the garden stone mold can be used again.6. Ideal for creating sidewalks, sidewalks, paths, patios, picnic areas and other exterior finishes.7. Take advantage of the personal philosophy of DIY with stone molds and immediately create beautiful paths in your garden.8. The DIY plastic molding paving mold is a custom brick mold, the laying effect is like a stone.9. Make the path more exotic and create a style that belongs to your own garden path. How to use this concrete paver mold to build driveways: .Step 1: .Mix cement with water, according to package directions. When ready to use, the concrete will have the consistency of oatmeal and be thick enough to hold an edge when you slice it with a shovel. each area. Step 3:. Using rubber gloves, spread the concrete around the mold, filling in any gaps or low spots. Tap the mold with your hand to remove any air bubbles.Step 4:.Following the contours of the mold, smooth the concrete, wiping away any excess.Step 5:.Allow the concrete to set for up to five minutes, then remove gently the mould. For the next stretch, rotate the mold a quarter turn and place it next to the paver just completed, tilting it slightly if you are creating a curved path. Step 6 :.After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the soil around the newly formed pavers to help them settle. Note: The size is measured by hand, please allow slight measurement error. Photo color might be slightly different from the actual product due to color display of different monitors.