TUMALAGIA 2x DIY Paving Mold Concrete Mold Paving Paving Template Stone Paving Slabs For Sidewalks Stepping Stones Garden Lawn Tracks

LxWxH: 43x43x4 cm, the concrete form is very solid and stable, lasts a long time if used properly and professionally.

Material: Paving slabs made of very high-quality and stable polypropylene (PP ), can be reused hundreds of times if treated professionally.

Simple operation: 1.Place the mould, 2.fill with cement/concrete, 3.smooth out with a mason’s trowel, 4.lift off the mould. No expensive garden landscaper required, just pave your pathways yourself!

DIY: There are no limits to your imagination with our DIY concrete molds for indoor and outdoor use. The product is new and OVP 100% template!

Use: This paving mold is suitable for lawn grids, lawn pavers, terrace slabs, floor slabs, pavement slabs, parking lots. Concrete molds for making your own wall coverings, edging stones, wall cladding, etc. – save money.

Instruction manual:

4 simple steps:

1) Please smooth the area for concrete, pour with water, then lay the paving mold.（The Amount of cement of one floor mold is about 3-4 kg）

2) Please prepare the concrete mortar (1 bucket of the cement, 3 buckets of: sand or crushed granite or slag).</ p>

Fill the mold with the mixed ingredients.

3) Excess concrete with a spatula or another

Carefully remove appropriate tool.

4) Wait 3-4 minutes to move the mold to the new position, no need to wait, until the mold is completely dry. In order to speed up the process, you should use several molds at the same time.

Specifications:

< p>

Dimensions: 43 x 43 x 4cm

Material: strong plastic

Colour: black

Use: lawn grid, lawn paving, patio slab, floor slab, pavement slab, parking lot

Caution: The article is not a child’s toy< /p>

Scope of delivery:

Plaster form

Instructions